[LinuxPPS] weird...

[Udo van den Heuvel]

So I compiled 2.6.19 again.
Took the patch from Rodolfo's site (it was identical to my GIT patch but
just to be sure).
No change. /proc stays 0.
[root at epia ~]#  cat /proc/pps/0?/*
0.000000000 #0
0.000000000 #0
0.000000000 #0
0.000000000 #0
0.000000000 #0
0.000000000 #0
0.000000000 #0
0.000000000 #0
[root at epia ~]#  cat /proc/pps/0?/*
0.000000000 #0
0.000000000 #0
0.000000000 #0
0.000000000 #0
0.000000000 #0
0.000000000 #0
0.000000000 #0
0.000000000 #0
[root at epia ~]#  cat /proc/pps/0?/*
0.000000000 #0
0.000000000 #0
0.000000000 #0
0.000000000 #0
0.000000000 #0
0.000000000 #0
0.000000000 #0
0.000000000 #0

And:

     remote           refid      st t when poll reach   delay   offset
jitter
==============================================================================
 127.127.1.0     .LOCL.          10 l   54   64    7    0.000    0.000
 0.001
*127.127.20.0    .GPS.            0 l    5   16  377    0.000  -14.518
 6.708
 194.109.22.18   193.67.79.202    2 u   35   64    7    7.429  151.367
 3.260
 193.67.79.202   .GPS.            1 u   44   64    7   16.379  160.583
 8.056
x193.79.237.14   .GPS.            1 u    -   64   17   12.915  156.954
 8.420

It is not the links in /dev:

[root at epia linux]# cd /dev
[root at epia dev]# ls -l *ps*
lrwxrwxrwx 1 root root 10 Dec  6 18:14 gps0 -> /dev/ttyS0
lrwxrwxrwx 1 root root 10 Dec  6 18:14 pps0 -> /dev/ttyS0

How can I find out the cause?
What can I do more to find out what is wrong?

Is my GPS toast?
Is it a bug?
A config problem?

Need my .config?