[LinuxPPS] New code

[James Boddington]

Rodolfo Giometti wrote:
> On Sat, Mar 03, 2007 at 01:35:22PM -0800, gnu not unix wrote:
> I'm just waiting for a feedback from you since I have no hardware to
> test serial code and I don't want to send buggy code to the LKML!  :)
> 

I am using 2.6.20-gf60d7093. So far so good.

(root at ntp) ntpq -pn
      remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
  127.127.1.0     .LOCL.          10 l   26   64  377    0.000    0.000   0.002
+127.127.20.0    .GPS.            0 l    2   16  377    0.000    0.010   0.002
o127.127.22.0    .PPS.            0 l   11   16  377    0.000    0.010   0.002
+127.127.28.3    .AVG.            0 l   15   16  377    0.000    0.010   0.002

(root at ntp) setserial /dev/ttyS0
/dev/ttyS0, UART: 8250, Port: 0x03f8, IRQ: 4, Flags: hardpps low_latency

pps_core: LinuxPPS API ver. 2 registered
pps_core: Software ver. 3.0.0-rc1 - Copyright 2005-2007 Rodolfo Giometti 
<giometti at linux.it>
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial_core: PPS source #0 "/dev/ttyS0" added to the system
serial_core: PPS source #0 "/dev/ttyS0" added to the system

-- 
    James