[LinuxPPS] NTP not using PPS

[Rodolfo Giometti]

On Wed, Oct 24, 2007 at 06:20:14PM -0000, susmi sarah george wrote:
>    I tried the foll.
> 
>    ln -s /dev/ttyS3 /dev/gps3
> 
>    and in the ntp.conf as...
> 
>    server 127.127.20.3 mode 1 prefer minpoll 4
>    fudge 127.127.20.3 flag3 1 flag2 0 time1 0.0
> 
>    minicom is working on the serial port with the gps

It seems ok...

>    ...but log messages not showing anything about PPS

Can you please check if your PPS support is enabled:

   $ grep HAVE_PPSAPI config.h
   #define HAVE_PPSAPI 1

Ciao,

Rodolfo

-- 

GNU/Linux Solutions                  e-mail:    giometti at enneenne.com
Linux Device Driver                             giometti at gnudd.com
Embedded Systems                     		giometti at linux.it
UNIX programming                     phone:     +39 349 2432127