[LinuxPPS] Newbi questions. Testing without hardware andconfigure and build NTP with OnCore support?

[Hal V. Engel]

On Tuesday 03 June 2008 03:36:58 pm Remco den Besten wrote:
> Hi Hal,
>
> You're welcome. I have to mention that I also needed the help of Reg to get
> things going and wrote my blog entry to prevent inventing wheels for
> everyone as much as possible. I am curious whether you have a lock/sync
> after connecting your Oncore! Will you let us know?
>
> Regards,
> Remco

Remco,

There is lots of info about this stuff on the net and else where but it is 
fragmented and hard to sort through.  I had seen your blog at some point while 
looking through things but had overlooked the parts related to building ntp.  

I will let you know how things are working once I have the OnCore.

Hal

>
>   > Look at
>   >
>   > http://rembl.org/index.php/2008/04/19/motorola-oncore-ut-and-linuxpps/
>   > and
>   >
>   > give it a try.
>   >
>   >
>   >
>   > Remco
>
>   Remco,
>
>
>   Thanks that helped a lot. I was even able to use the Gentoo ebuild for
> ntp by setting the parse-clocks use variable once I had things correctly
> setup. At this point I have everything working as far as I can test it at
> this point. I will know for sure after I have my GPS hooked up in a few
> days.
>
>
>   As a side note I tried a modified for my distro version of the UDEV rules
> that I found in another email in the archives and these where not working.
> Here is what I found worked:

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ml.enneenne.com/pipermail/linuxpps/attachments/20080603/2e3d91ce/attachment-0001.htm