[LinuxPPS] Oncore section of the LinuxPPS NTPD support web page. Improve docmumentation.

[clemens at dwf.com]

<snip>

> and the 'option'
>
> 	Posn3D

I have never been able to figure out why this causes problems on Hal's 
machines.

> By the way I am using a modified version of the latest OncorePlot code that 
> displays the signal to noise data when satellite information is enabled.   It 
> is a simple mod that only adds perhaps 8 or 10 lines of code.   If you are 
> interested I can create a patch and get this to you.

send me the change and Ill add it before I replace the old version of 
OncorePlot
on ntp.org


> You are correct that with a setting of MODE 2 or 4 that the ntp Oncore driver 
> will do a site survey at startup.

Once a user has his Oncore running, I would only suggest doing a mode 2 or 4 
once to
get the position, and then use Mode 1 from then on out.


-- 
                                        Reg.Clemens
                                        reg at dwf.com