[LinuxPPS] time_pps_kcbind return EOPNOTSUPP
Udo van den Heuvel
udovdh at xs4all.nl
Sun May 30 18:46:39 CEST 2010
On 2010-05-30 10:53, Udo van den Heuvel wrote:
> So what is going on?
See below:
[root at epia wide-dhcpv6-20080615]# ntptime
ntp_gettime() returns code 0 (OK)
time cfacfde8.15b3d074 Sun, May 30 2010 17:08:24.084, (.084775696),
maximum error 8045501 us, estimated error 0 us
ntp_adjtime() returns code 0 (OK)
modes 0x0 (),
offset 0.000 us, frequency -74.032 ppm, interval 4 s,
maximum error 8045501 us, estimated error 0 us,
status 0x2001 (PLL,NANO),
time constant 6, precision 0.001 us, tolerance 500 ppm,
pps frequency -74.032 ppm, stability 0.000 ppm, jitter 0.000 us,
intervals 0, jitter exceeded 0, stability exceeded 0, errors 0.
[root at epia wide-dhcpv6-20080615]# ntpq -pn
remote refid st t when poll reach delay offset
jitter
==============================================================================
*127.127.1.0 .LOCL. 5 l 201 64 10 0.000 0.000
0.001
x127.127.20.0 .GPS. 0 l 8 16 377 0.000 16.603
4.996
x127.127.22.0 .PPS. 0 l 7 16 377 0.000 16.673
5.034
194.109.22.18 193.67.79.202 2 u 66 64 7 20.204 -0.742
56.192
194.109.20.18 193.67.79.202 2 u 65 64 7 20.068 5.019
6.406
193.67.79.202 .PPS. 1 u - 64 17 24.082 8.530
47.348
83.163.219.98 .DCFa. 1 u 64 64 7 40.190 -7.769
10.638
134.221.205.12 .PPS. 1 u 62 64 7 24.158 -1.132
32.705
193.79.237.14 .PPS. 1 u 2 64 17 20.239 8.705
65.378
[root at epia wide-dhcpv6-20080615]# ntpq -pn
remote refid st t when poll reach delay offset
jitter
==============================================================================
127.127.1.0 .LOCL. 5 l 209 64 10 0.000 0.000
0.001
x127.127.20.0 .GPS. 0 l 16 16 377 0.000 16.603
4.996
x127.127.22.0 .PPS. 0 l 15 16 377 0.000 16.673
5.034
-194.109.22.18 193.67.79.202 2 u 7 64 17 20.204 -0.742
46.566
+194.109.20.18 193.67.79.202 2 u 6 64 17 20.068 5.019
6.157
+193.67.79.202 .PPS. 1 u 8 64 17 24.082 8.530
47.348
*83.163.219.98 .DCFa. 1 u 5 64 17 40.175 5.545
9.164
134.221.205.12 .PPS. 1 u 3 64 17 24.158 -1.132
27.852
+193.79.237.14 .PPS. 1 u 10 64 17 20.239 8.705
65.378
[root at epia wide-dhcpv6-20080615]# ntpq -pn
remote refid st t when poll reach delay offset
jitter
==============================================================================
127.127.1.0 .LOCL. 5 l 214 64 10 0.000 0.000
0.001
x127.127.20.0 .GPS. 0 l 5 16 377 0.000 17.760
5.033
x127.127.22.0 .PPS. 0 l 4 16 377 0.000 17.816
5.045
-194.109.22.18 193.67.79.202 2 u 12 64 17 20.204 -0.742
46.566
+194.109.20.18 193.67.79.202 2 u 11 64 17 20.068 5.019
6.157
+193.67.79.202 .PPS. 1 u 13 64 17 24.082 8.530
47.348
*83.163.219.98 .DCFa. 1 u 10 64 17 40.175 5.545
9.164
+134.221.205.12 .PPS. 1 u 8 64 17 24.158 -1.132
27.852
+193.79.237.14 .PPS. 1 u 15 64 17 20.239 8.705
65.378
[root at epia wide-dhcpv6-20080615]# ntptime
ntp_gettime() returns code 5 (ERROR)
time cfacfdfd.9e132b1c Sun, May 30 2010 17:08:45.617, (.617480237),
maximum error 992822 us, estimated error 2449 us
ntp_adjtime() returns code 5 (ERROR)
modes 0x0 (),
offset 6584.409 us, frequency -72.684 ppm, interval 4 s,
maximum error 992822 us, estimated error 2449 us,
status 0x2007 (PLL,PPSFREQ,PPSTIME,NANO),
time constant 6, precision 0.001 us, tolerance 500 ppm,
pps frequency -74.032 ppm, stability 0.000 ppm, jitter 0.000 us,
intervals 0, jitter exceeded 0, stability exceeded 0, errors 0.
As soon as PPSFREQ and PPSTIME occur the status becomes ERROR.
What does that say?
Udo
More information about the LinuxPPS
mailing list