[LinuxPPS] ntpd
Rodolfo Giometti
giometti at linux.it
Thu Aug 3 18:31:51 CEST 2006
On Thu, Aug 03, 2006 at 05:59:16PM +0200, Folkert van Heusden wrote:
>
> keetweej:/usr/src/ntp-dev-4.2.1p255-RC# cat /proc/tty/drivers
> /dev/tty /dev/tty 5 0 system:/dev/tty
> /dev/console /dev/console 5 1 system:console
> /dev/ptmx /dev/ptmx 5 2 system
> /dev/vc/0 /dev/vc/0 4 0 system:vtmaster
> serial /dev/ttyS 4 64-67 serial
> pty_slave /dev/pts 136 0-1048575 pty:slave
> pty_master /dev/ptm 128 0-1048575 pty:master
> pty_slave /dev/ttyp 3 0-255 pty:slave
> pty_master /dev/pty 2 0-255 pty:master
> unknown /dev/tty 4 1-63 console
>
> > Please, send to us whole /proc/pps/sources content.
>
> keetweej:/usr/src/ntp-dev-4.2.1p255-RC# cat /proc/pps/sources
> id mode echo name path
> ---- ------ ---- ---------------- ----------------
> 00 1133 no pps_8250_0 /dev/ttyS0
> 01 1133 no pps_8250_1 /dev/ttyS1
> 02 1133 no pps_8250_2 /dev/ttyS2
> 03 1133 no pps_8250_3 /dev/ttyS3
> 04 1133 no pps_8250_2 /dev/ttyS2
> 05 1133 no pps_8250_3 /dev/ttyS3
> 06 1133 no pps_8250_0 /dev/ttyS0
> 07 1133 no pps_8250_1 /dev/ttyS1
Not ok! Something is wrong.
> Please note: the motherboard has 2 onboard serial ports. On the second
> (which I can access via /dev/ttyS1 with minicom) is the GPS connected.
> But there's also a plug-in pci board with 2 serial ports on it in the
> system. Maybe that screws things up?
I think so! Can you temporary remove the PCI board and using only the
onboard serial ports?
Ciao,
Rodolfo
--
GNU/Linux Solutions e-mail: giometti at enneenne.com
Linux Device Driver giometti at gnudd.com
Embedded Systems giometti at linux.it
UNIX programming phone: +39 349 2432127
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
Url : http://ml.enneenne.com/pipermail/linuxpps/attachments/20060803/2888a728/attachment.pgp
More information about the LinuxPPS
mailing list