[LinuxPPS] ntpd

[Folkert van Heusden]

> >>> id      mode    echo    name                    path
> >>> ----    ------  ----    ----------------        ----------------
> >>> 00      1133    no      pps_8250_0              /dev/ttyS0
> >>> 01      1133    no      pps_8250_1              /dev/ttyS1
> >>> ...
> >>> 06      1133    no      pps_8250_0              /dev/ttyS0
> >>> 07      1133    no      pps_8250_1              /dev/ttyS1
> >>> now which is what?
> >> This is not correct. Which serial driver did you loaded? Use "lsmod"
> >> command.
> > 8250_pnp                8096  0
> > 8250_pci               18848  0
> > 8250                   18784  6 8250_pnp,8250_pci
> > serial_core            15968  1 8250
> > pps_core                9096  2 8250
> > 
> > these modules get automatically loaded.
> Try to use a port that is not on the PCI card.

I *AM* using a port that is *NOT* on the pci card.


Folkert van Heusden

-- 
www.vanheusden.com/multitail - win een vlaai van multivlaai! zorg
ervoor dat multitail opgenomen wordt in Fedora Core, AIX, Solaris of
HP/UX en win een vlaai naar keuze
----------------------------------------------------------------------
Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com