[LinuxPPS] Kernel configuration and more ......

[Rodolfo Giometti]

On Sun, Oct 28, 2007 at 10:53:14PM +0000, Paul wrote:
> I can add a bit more:
> I am using 2.6.23pps-g9412fc58
> I compile with just one serial port and only enable one in the BIOS.
> Using minicom NMEA data can be read (so I've got the right port - ttyS0)
> Using statserial I sometimes see 1 on the DCD pin (so the PPS is
> ticking)
> I use ppsctl to enable the ttyS0 port and the directory
> below /sys/class/pps is occupied with pps0.
> But the assert or clear never change.

Did you look at debugging messages or at
/sys/class/pps/pps0/{assert,clear} entries?

Rodolfo

-- 

GNU/Linux Solutions                  e-mail:    giometti at enneenne.com
Linux Device Driver                             giometti at gnudd.com
Embedded Systems                     		giometti at linux.it
UNIX programming                     phone:     +39 349 2432127